Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE #0: Sun May 7 04:32:43 UTC 2006 root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0f24000. Preloaded mfs_root "/boot/mfsroot" at 0xc0f2423c. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0f24280. MP Configuration Table version 1.4 found at 0xc009fd71 Table 'FACP' at 0x1f682c78 Table 'APIC' at 0x1f682cec MADT: Found table at 0x1f682cec APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled MADT: Found CPU APIC ID 1 ACPI ID 1: enabled ACPI APIC Table: Calibrating clock(s) ... i8254 clock: 1193177 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1596016800 Hz CPU: Genuine Intel(R) CPU T2050 @ 1.60GHz (1596.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 Features=0xbfe9fbff Features2=0xc189,> Cores per package: 2 real memory = 526843904 (502 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000001ed62fff, 500424704 bytes (122174 pages) avail memory = 501993472 (478 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6c10 bios32: Entry = 0xfd62d (c00fd62d) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd5b0+0x44 pnpbios: Found PnP BIOS data at 0xc00f6c80 pnpbios: Entry = e4c7:a900 Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000200 err: 0x00010000 pcm: 0x00010000 wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device io: kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled rr232x: RocketRAID 232x controller driver v1.02 (May 7 2006 04:32:33) npx0: INT 16 interface acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80001014 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27a08086) pcibios: BIOS version 2.10 Found $PIR table, 16 entries at 0xc00fdec0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 7 A 0x60 6 10 11 embedded 0 1 A 0x60 6 10 11 slot 6 1 0 A 0x60 6 10 11 slot 6 1 0 B 0x61 6 10 11 slot 6 1 0 C 0x62 6 10 11 slot 6 1 0 D 0x63 6 10 11 embedded 0 2 A 0x60 6 10 11 embedded 0 27 A 0x6a 6 10 11 embedded 0 28 A 0x61 6 10 11 embedded 0 28 B 0x60 6 10 11 embedded 0 28 C 0x62 6 10 11 embedded 0 28 D 0x63 6 10 11 slot 7 2 0 A 0x60 6 10 11 slot 7 2 0 B 0x61 6 10 11 slot 7 2 0 C 0x62 6 10 11 slot 7 2 0 D 0x63 6 10 11 slot 8 255 0 A 0x61 6 10 11 slot 8 255 0 B 0x62 6 10 11 slot 8 255 0 C 0x63 6 10 11 slot 8 255 0 D 0x60 6 10 11 slot 9 3 0 A 0x62 6 10 11 slot 9 3 0 B 0x63 6 10 11 slot 9 3 0 C 0x60 6 10 11 slot 9 3 0 D 0x61 6 10 11 embedded 0 29 A 0x6b 6 10 11 embedded 0 29 B 0x63 6 10 11 embedded 0 29 C 0x62 6 10 11 embedded 0 29 D 0x60 6 10 11 embedded 0 30 A 0x6a 6 10 11 embedded 0 30 B 0x68 6 10 11 embedded 4 8 A 0x68 6 10 11 embedded 4 6 A 0x62 6 10 11 embedded 4 6 B 0x61 6 10 11 embedded 4 10 A 0x6a 6 10 11 embedded 0 31 A 0x62 6 10 11 embedded 0 31 B 0x63 6 10 11 embedded 0 31 D 0x60 6 10 11 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 0 func 0 ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc3610300), AE_NOT_EXIST ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc3610300), AE_NOT_EXIST pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 1 3 4 5 6 7 10 12 14 15 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 1 3 4 5 6 7 11 12 14 15 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 1 3 4 5 6 7 11 12 14 15 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 1 3 4 5 6 7 10 12 14 15 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 1 3 4 5 6 7 10 12 14 15 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 1 3 4 5 6 7 11 12 14 15 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 1 3 4 5 6 7 10 12 14 15 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 1 3 4 5 6 7 10 12 14 15 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 1 3 4 5 6 7 11 12 14 15 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 1 3 4 5 6 7 11 12 14 15 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 11 12 14 15 acpi_ec0: port 0x62,0x66 on acpi0 acpi_ec0: info: new max delay is 20 us ACPI timer: 1/2 1/1 1/2 1/1 1/1 1/2 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: on acpi0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x1010 acpi_lid0: on acpi0 battery0: on acpi0 acpi_acad0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x27a0, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27a2, revid=0x03 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type 1, range 32, base d0300000, size 19, enabled map[14]: type 4, range 32, base 00001800, size 3, enabled map[18]: type 3, range 32, base c0000000, size 28, enabled map[1c]: type 1, range 32, base d0400000, size 18, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27a6, revid=0x03 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base d0380000, size 19, enabled found-> vendor=0x8086, dev=0x27d8, revid=0x02 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base d0640000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x27d0, revid=0x02 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x27d4, revid=0x02 bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 pcib0: matched entry for 0.28.INTC pcib0: slot 28 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x27c8, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x27c9, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 00001840, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x27ca, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[20]: type 4, range 32, base 00001860, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x27cb, revid=0x02 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type 4, range 32, base 00001880, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27cc, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base d0644000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2448, revid=0xe2 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27b9, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27c4, revid=0x02 bus=0, slot=31, func=2 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b8, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 000018b0, size 4, enabled found-> vendor=0x8086, dev=0x27da, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 000018c0, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 pci0: at device 2.0 (no driver attached) pci0: at device 2.1 (no driver attached) pci0: at device 27.0 (no driver attached) pcib1: irq 17 at device 28.0 on pci0 pcib1: secondary bus 2 pcib1: subordinate bus 2 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xd0000000-0xd00fffff pcib1: prefetched decode 0xfff00000-0xfffff pci2: on pcib1 pci2: physical bus=2 found-> vendor=0x10ec, dev=0x8136, revid=0x01 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type 4, range 32, base 00002000, size 8, enabled pcib1: (null) requested I/O range 0x2000-0x20ff: in range map[18]: type 1, range 64, base d0000000, size 12, enabled pcib1: (null) requested memory range 0xd0000000-0xd0000fff: good pcib1: matched entry for 2.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 pci2: at device 0.0 (no driver attached) pcib2: irq 18 at device 28.2 on pci0 pcib2: secondary bus 3 pcib2: subordinate bus 3 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xd0100000-0xd01fffff pcib2: prefetched decode 0xfff00000-0xfffff pci3: on pcib2 pci3: physical bus=3 found-> vendor=0x8086, dev=0x4222, revid=0x02 bus=3, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base d0100000, size 12, enabled pcib2: (null) requested memory range 0xd0100000-0xd0100fff: good pcib2: matched entry for 3.0.INTA pcib2: slot 0 INTA hardwired to IRQ 18 pci3: at device 0.0 (no driver attached) uhci0: port 0x1820-0x183f irq 23 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 49 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x1840-0x185f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x1860-0x187f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0x1880-0x189f irq 16 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 52 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xd0644000-0xd06443ff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd0644000 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib3: at device 30.0 on pci0 pcib3: secondary bus 4 pcib3: subordinate bus 4 pcib3: I/O decode 0x3000-0x3fff pcib3: memory decode 0xd0200000-0xd02fffff pcib3: prefetched decode 0xfff00000-0xfffff pcib3: Subtractively decoded bridge. pci4: on pcib3 pci4: physical bus=4 found-> vendor=0x1524, dev=0x1412, revid=0x10 bus=4, slot=6, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, enabled found-> vendor=0x1524, dev=0x0530, revid=0x01 bus=4, slot=6, func=1 class=05-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x01 (250 ns), maxlat=0x04 (1000 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0200800, size 7, enabled pcib3: (null) requested memory range 0xd0200800-0xd020087f: good pcib3: matched entry for 4.6.INTB pcib3: slot 6 INTB hardwired to IRQ 17 found-> vendor=0x1524, dev=0x0550, revid=0x01 bus=4, slot=6, func=2 class=08-05-01, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0200c00, size 8, enabled pcib3: (null) requested memory range 0xd0200c00-0xd0200cff: good pcib3: matched entry for 4.6.INTB pcib3: slot 6 INTB hardwired to IRQ 17 found-> vendor=0x1524, dev=0x0520, revid=0x01 bus=4, slot=6, func=3 class=05-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x01 (250 ns), maxlat=0x04 (1000 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0201000, size 7, enabled pcib3: (null) requested memory range 0xd0201000-0xd020107f: good pcib3: matched entry for 4.6.INTB pcib3: slot 6 INTB hardwired to IRQ 17 found-> vendor=0x1524, dev=0x0551, revid=0x01 bus=4, slot=6, func=4 class=05-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x48 (18000 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0201400, size 8, enabled pcib3: (null) requested memory range 0xd0201400-0xd02014ff: good pcib3: matched entry for 4.6.INTB pcib3: slot 6 INTB hardwired to IRQ 17 found-> vendor=0x1106, dev=0x3044, revid=0xc0 bus=4, slot=10, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) intpin=a, irq=10 powerspec 2 supports D0 D2 D3 current D0 map[10]: type 1, range 32, base d0200000, size 11, enabled pcib3: (null) requested memory range 0xd0200000-0xd02007ff: good map[14]: type 4, range 32, base 00003000, size 7, enabled pcib3: (null) requested I/O range 0x3000-0x307f: in range pcib3: matched entry for 4.10.INTA pcib3: slot 10 INTA hardwired to IRQ 22 cbb0: at device 6.0 on pci4 pcib3: cbb0 requested memory range 0xd0200000-0xd02fffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xd0202000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib3: matched entry for 4.6.INTA pcib3: slot 6 INTA hardwired to IRQ 18 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x14121524 0x02100007 0x06070010 0x00824000 0x10: 0xd0202000 0x020000a0 0x20060504 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07400112 0x40: 0xff101179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0040d020 0x00000000 0x00000000 0x01511212 0x90: 0x604402c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe010001 0x00c00000 0x0000001b 0x00000005 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00003003 0x00800080 0x10080400 0x000007fe 0xd0: 0x00a00000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pci4: at device 6.1 (no driver attached) pci4: at device 6.2 (no driver attached) pci4: at device 6.3 (no driver attached) pci4: at device 6.4 (no driver attached) fwohci0: port 0x3000-0x307f mem 0xd0200000-0xd02007ff irq 22 at device 10.0 on pci4 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xd0200000 ioapic0: routing intpin 22 (PCI IRQ 22) to vector 53 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:08:0d:a0:d1:60:25:a3 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:08:0d:60:25:a3 fwe0: bpf attached fwe0: Ethernet address: 02:08:0d:60:25:a3 fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18b0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4 ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55 ata1: [MPSAFE] pci0: at device 31.3 (no driver attached) acpi_tz0: on acpi0 acpi_tz1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xcf000-0xcffff,0xe3000-0xe3fff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: failed to probe at port 0x378-0x37f irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x8c01 0x8c01 0x8c01 0x8c01 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x8c01 0x8c01 0x8c01 0x8c01 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices aue0: SIEMENS Siemens SpeedStream USB 10/100, rev 1.10/1.01, addr 2 miibus0: on aue0 ukphy0: on miibus0 ukphy0: OUI 0x000895, model 0x0001, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto aue0: bpf attached aue0: Ethernet address: 00:50:fc:a5:1e:fb aue0: if_start running deferred for Giant Device configuration finished. procfs registered lapic: Divisor 2, Frequency 66500249 hz Timecounter "TSC" frequency 1596016800 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. md0: Preloaded image 4423680 bytes at 0xc0a91928 battery0: battery initialization start acpi_ec0: info: new max delay is 40 us acpi_ec0: info: new max delay is 70 us battery0: battery initialization done, tried 1 timesacpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_tz0: _AC0: temperature 48.0 >= setpoint 0.0 acpi_tz0: switched from NONE to _AC0: 48.0C ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ad0: 76319MB at ata0-master UDMA33 ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire acd0: DVDR drive at ata1 as master acd0: read 4133KB/s (4133KB/s) write 4133KB/s (4133KB/s), 2000KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM 120mm data disc (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error ATA PseudoRAID loaded Trying to mount root from ufs:/dev/md0 start_init: trying /sbin/init start_init: trying /sbin/oinit start_init: trying /sbin/init.bak start_init: trying /rescue/init start_init: trying /stand/sysinstall